Guangzhou Ouster Hydraulic Co., Ltd.
Guangzhou Ouster Hydraulic Co., Ltd.
REXRTOH Piston Pump A10VSO 45   REXRTOH Piston Pump A10VSO 71   DAIKIN Piston Pump VZ50 Series  
English
English
  • Home
  • Stock Categories
    • REXRTOH Piston Pump A10VSO 45
    • REXRTOH Piston Pump A10VSO 71
    • DAIKIN Piston Pump VZ50 Series
    • DAIKIN Piston Pump VZ63 Series
    • DAIKIN Piston Pump V70 Series
    • DAIKIN Piston Pump VZ80 Series
    • DAIKIN Piston Pump Model
    • FAG Bearing
    • IKO Bearing
    • INA Bearing
    • KOYO Bearing
    • NSK Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Throttle check valve
    • REXROTH Twin throttle check valve
    • REXROTH Check valves
    • REXROTH Directional poppet valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • REXROTH Throttle check valves
    • REXROTH Directional spool valves
    • Jlm714149 Bearing
    • Timken 3984 Bearing
    • Jm511910 Bearing
    • Timken M86610 Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Bearing Slewing Ring
    • Kaydon Slewing Bearing
    • THK Linear Guide
    • THK Miniature Linear Guide
    • THK Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • THK Linear Bearings And Rails
    • THK Linear Motion
    • Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Single-row Deep Groove Ball Bearings
    • Wide Series Cylindrical Roller Bearings
  • Technical Articles
  • REXRTOH Piston Pump A10VSO 45
  • REXRTOH Piston Pump A10VSO 71
  • DAIKIN Piston Pump VZ50 Series
✖

Home

Stock Categories

Technical Articles

REXRTOH Piston Pump A10VSO 45

REXRTOH Piston Pump A10VSO 71

DAIKIN Piston Pump VZ50 Series

Home>Products>IKO Bearing>0.563 Inch | 14.3 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BHA98ZOH Needle Non Thrust Roller Bearings

  • 0.563 Inch | 14.3 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BHA98ZOH Needle Non Thrust Roller Bearings
  • 0.563 Inch | 14.3 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BHA98ZOH Needle Non Thrust Roller Bearings
  • 0.563 Inch | 14.3 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BHA98ZOH Needle Non Thrust Roller Bearings
  • 0.563 Inch | 14.3 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BHA98ZOH Needle Non Thrust Roller Bearings
  • 0.563 Inch | 14.3 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BHA98ZOH Needle Non Thrust Roller Bearings
  • 0.563 Inch | 14.3 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BHA98ZOH Needle Non Thrust Roller Bearings

IKO BHA98ZOH MODELS

Need a CAD or 3D Model?

What is BHA98ZOH bearing interchange？
Contact NowWhatsAppBe Our Agent

0.563 Inch | 14.3 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BHA98ZOH Needle Non Thrust Roller Bearings

category

IKO Bearing

IKO BHA98ZOH Bearing SPECIFICATIONS

  • 0.563 Inch | 14.3 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BHA98ZOH Needle Non Thrust Roller Bearings Needs Analysis , IKO Bearing Manufacturing 0.563 Inch | 14.3 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.5 Inch | 12.7 Millimeter Service . Get Guangzhou Ouster Hydraulic Co., Ltd. Your Free.

  • IKO

  • BHA98ZOH

  • 750000
  • 750575
  • Imperial
  • Pin-Type
  • 303000 lbf
  • 78700 lbf
  • 5.7500 in
  • 2.1970 in
Download IKO BHA98ZOH Spec Sheet
Guangzhou Ouster Hydraulic Co., Ltd.

Guangzhou Ouster Hydraulic Co., Ltd.China

  • Guangzhou Ouster Hydraulic Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

BHA98ZOH Product features

  • 750000
  • 750575
  • Imperial
  • Pin-Type
  • 303000 lbf
  • 78700 lbf
  • 5.7500 in
  • 2.1970 in
  • 0.13 in
  • 6.38 in
  • 6.57 in
  • 0.42 in
  • 0.21 in
  • -0.42 in
  • 45200 lbf
  • 174000 lbf
  • 196000 lbf
  • 25700 lbf
  • 1.76
  • 431.4
  • 54.4
  • 0.0974
0.563 Inch | 14.3 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BHA98ZOH Needle Non Thrust Roller Bearings pdf

IKO BHA98ZOH 0.563 Inch | 14.3 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BHA98ZOH Needle Non Thrust Roller Bearings Product Identifiers

Frequently bought 0.563 Inch | 14.3 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BHA98ZOH Needle Non Thrust Roller Bearings together

No.BrandBdDNounWeightUNSPSCRetainerSeparable
BHA98ZOHIKO0.5 Inch | 12.7 Millimeter0.563 Inch | 14.3 Millimeter0.813 Inch | 20.65 MillimeterBearing0.01131171512YesNo

 

IKO NAST45ZZR Cam Follower and Track Roller - Yoke TypeSeries:750000; Cone Part Number:750575; Design Units:Imperial; Cage Type:Pin-Type; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:303000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:78700 lbf; d:5.7500 in; B - Cone Width:2.1970 in; R - Cone Backface To Clear Radius3:0.13 in; da - Cone Frontface Backing Diameter:6.38 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.42 in; Aa - Cage-Cone Backface Clearance:0.21 in; a - Effective Center Location4:-0.42 in; C90 - Dynamic Radial Rating (90 million revolutions)5:45200 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:174000 lbf; C0 - Static Radial Rating:196000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:25700 lbf; K - Factor8:1.76; G1 - Heat Generation Factor (Roller-Raceway):431.4; G2 - Heat Generation Factor (Rib-Roller End):54.4; Cg - Geometry Factor:0.0974;
1.25 Inch | 31.75 Millimeter x 1.5 Inch | 38.1 Millimeter x 1 Inch | 25.4 Millimeter IKO LRB202416 Needle Non Thrust Roller BearingsSeries:750000; Cone Part Number:750575; Design Units:Imperial; Cage Type:Pin-Type; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:303000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:78700 lbf; d:5.7500 in; B - Cone Width:2.1970 in; R - Cone Backface To Clear Radius3:0.13 in; da - Cone Frontface Backing Diameter:6.38 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.42 in; Aa - Cage-Cone Backface Clearance:0.21 in; a - Effective Center Location4:-0.42 in; C90 - Dynamic Radial Rating (90 million revolutions)5:45200 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:174000 lbf; C0 - Static Radial Rating:196000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:25700 lbf; K - Factor8:1.76; G1 - Heat Generation Factor (Roller-Raceway):431.4; G2 - Heat Generation Factor (Rib-Roller End):54.4; Cg - Geometry Factor:0.0974;
0.669 Inch | 17 Millimeter x 0.827 Inch | 21 Millimeter x 0.63 Inch | 16 Millimeter IKO LRT172116 Needle Non Thrust Roller BearingsSeries:750000; Cone Part Number:750575; Design Units:Imperial; Cage Type:Pin-Type; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:303000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:78700 lbf; d:5.7500 in; B - Cone Width:2.1970 in; R - Cone Backface To Clear Radius3:0.13 in; da - Cone Frontface Backing Diameter:6.38 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.42 in; Aa - Cage-Cone Backface Clearance:0.21 in; a - Effective Center Location4:-0.42 in; C90 - Dynamic Radial Rating (90 million revolutions)5:45200 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:174000 lbf; C0 - Static Radial Rating:196000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:25700 lbf; K - Factor8:1.76; G1 - Heat Generation Factor (Roller-Raceway):431.4; G2 - Heat Generation Factor (Rib-Roller End):54.4; Cg - Geometry Factor:0.0974;
IKO CF6UU Cam Follower and Track Roller - Stud TypeSeries:750000; Cone Part Number:750575; Design Units:Imperial; Cage Type:Pin-Type; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:303000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:78700 lbf; d:5.7500 in; B - Cone Width:2.1970 in; R - Cone Backface To Clear Radius3:0.13 in; da - Cone Frontface Backing Diameter:6.38 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.42 in; Aa - Cage-Cone Backface Clearance:0.21 in; a - Effective Center Location4:-0.42 in; C90 - Dynamic Radial Rating (90 million revolutions)5:45200 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:174000 lbf; C0 - Static Radial Rating:196000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:25700 lbf; K - Factor8:1.76; G1 - Heat Generation Factor (Roller-Raceway):431.4; G2 - Heat Generation Factor (Rib-Roller End):54.4; Cg - Geometry Factor:0.0974;
IKO PHSA5 Spherical Plain Bearings - Rod EndsSeries:750000; Cone Part Number:750575; Design Units:Imperial; Cage Type:Pin-Type; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:303000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:78700 lbf; d:5.7500 in; B - Cone Width:2.1970 in; R - Cone Backface To Clear Radius3:0.13 in; da - Cone Frontface Backing Diameter:6.38 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.42 in; Aa - Cage-Cone Backface Clearance:0.21 in; a - Effective Center Location4:-0.42 in; C90 - Dynamic Radial Rating (90 million revolutions)5:45200 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:174000 lbf; C0 - Static Radial Rating:196000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:25700 lbf; K - Factor8:1.76; G1 - Heat Generation Factor (Roller-Raceway):431.4; G2 - Heat Generation Factor (Rib-Roller End):54.4; Cg - Geometry Factor:0.0974;
0.709 Inch | 18 Millimeter x 1.024 Inch | 26 Millimeter x 0.512 Inch | 13 Millimeter IKO RNA49/14UU Needle Non Thrust Roller BearingsSeries:750000; Cone Part Number:750575; Design Units:Imperial; Cage Type:Pin-Type; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:303000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:78700 lbf; d:5.7500 in; B - Cone Width:2.1970 in; R - Cone Backface To Clear Radius3:0.13 in; da - Cone Frontface Backing Diameter:6.38 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.42 in; Aa - Cage-Cone Backface Clearance:0.21 in; a - Effective Center Location4:-0.42 in; C90 - Dynamic Radial Rating (90 million revolutions)5:45200 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:174000 lbf; C0 - Static Radial Rating:196000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:25700 lbf; K - Factor8:1.76; G1 - Heat Generation Factor (Roller-Raceway):431.4; G2 - Heat Generation Factor (Rib-Roller End):54.4; Cg - Geometry Factor:0.0974;
1.875 Inch | 47.625 Millimeter x 2.438 Inch | 61.925 Millimeter x 1.25 Inch | 31.75 Millimeter IKO BR303920UU Needle Non Thrust Roller BearingsSeries:750000; Cone Part Number:750575; Design Units:Imperial; Cage Type:Pin-Type; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:303000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:78700 lbf; d:5.7500 in; B - Cone Width:2.1970 in; R - Cone Backface To Clear Radius3:0.13 in; da - Cone Frontface Backing Diameter:6.38 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.42 in; Aa - Cage-Cone Backface Clearance:0.21 in; a - Effective Center Location4:-0.42 in; C90 - Dynamic Radial Rating (90 million revolutions)5:45200 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:174000 lbf; C0 - Static Radial Rating:196000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:25700 lbf; K - Factor8:1.76; G1 - Heat Generation Factor (Roller-Raceway):431.4; G2 - Heat Generation Factor (Rib-Roller End):54.4; Cg - Geometry Factor:0.0974;
IKO GS80115 Thrust Roller BearingSeries:750000; Cone Part Number:750575; Design Units:Imperial; Cage Type:Pin-Type; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:303000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:78700 lbf; d:5.7500 in; B - Cone Width:2.1970 in; R - Cone Backface To Clear Radius3:0.13 in; da - Cone Frontface Backing Diameter:6.38 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.42 in; Aa - Cage-Cone Backface Clearance:0.21 in; a - Effective Center Location4:-0.42 in; C90 - Dynamic Radial Rating (90 million revolutions)5:45200 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:174000 lbf; C0 - Static Radial Rating:196000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:25700 lbf; K - Factor8:1.76; G1 - Heat Generation Factor (Roller-Raceway):431.4; G2 - Heat Generation Factor (Rib-Roller End):54.4; Cg - Geometry Factor:0.0974;

 

 

0.563 Inch | 14.3 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BHA98ZOH Needle Non Thrust Roller Bearings Video

 

IKO BHA98ZOH INTERCHANGE

IKO Bearing Part series BHA98ZOH is a potential replacement for these common bearing part numbers:

  • BHA98ZOH

  • BHA98ZOH

  • BHA98ZOH

  • BHA98ZOH

  • BHA98ZOH

  • BHA98ZOH

  • BHA98ZOH

  • BHA98ZOH

Contact Us

Guangzhou Ouster Hydraulic Co., Ltd.
AddressNo. 56, Zhongyun Rd. Zhongcun Street, Panyu District, Guangzhou 511495 
Phone(Working Time)86-15153696688
Fax
  • Guangzhou Ouster Hydraulic Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

IKO BHA98ZOH Technical Articles

Are shake JUNT bearings good?
Are Shake Junt bearings any good?!?! [Archive] - SkateboardThey are really good but i reccomend taking off the shields because they don't protect the bearing from dirt and they actually make them roll  Shake Junt OG's ABEC 7 Bearings...
Can I use wd40 on bearings?
Can you use wd40 to clean bearings? | HomeXYou should never use WD40 to clean skate bearings. This is a product specifically designed to remove rust and dirt, not like a lubricant or roller detergent Can You Use WD40 To Clean Skateboard BearingsYou...
Does an automatic transmission have a throwout bearing?
Diagnosing a Clutch Bearing or Bushing Noise | Know YourLearn how to diagnose a clutch bearing or bushing noise from Know Your Parts. Next release the clutch with the transmission in first gear. Noise under this Diagnosing clutch and manual...

IKO Bearing CATEGORIES

  • REXRTOH Piston Pump A10VSO 45
  • REXRTOH Piston Pump A10VSO 71
  • DAIKIN Piston Pump VZ50 Series
  • DAIKIN Piston Pump VZ63 Series
  • DAIKIN Piston Pump V70 Series
  • DAIKIN Piston Pump VZ80 Series
  • DAIKIN Piston Pump Model
  • FAG Bearing
  • IKO Bearing
  • INA Bearing
  • KOYO Bearing
  • NSK Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Throttle check valve
  • REXROTH Twin throttle check valve
  • REXROTH Check valves
  • REXROTH Directional poppet valves
  • REXROTH Throttle valves
  • REXROTH Valves
  • REXROTH Pressure relief valve
  • REXROTH Pressure reducing valve
  • REXROTH Throttle check valves
  • REXROTH Directional spool valves
  • Jlm714149 Bearing
  • Timken 3984 Bearing
  • Jm511910 Bearing
  • Timken M86610 Bearing
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Bearing Slewing Ring
  • Kaydon Slewing Bearing
  • THK Linear Guide
  • THK Miniature Linear Guide
  • THK Linear Guide Rails
  • High Temperature Linear Guide
  • Curved Linear Guide
  • THK Linear Bearings And Rails
  • THK Linear Motion
  • Cylindrical Roller Bearings
  • Bearings For Metric And Inch Shaft Sizes
  • Single-row Deep Groove Ball Bearings
  • Wide Series Cylindrical Roller Bearings
More

Customers Who Viewed IKO BHA98ZOH Bearing Also Viewed

  • IKO GS80115 Thrust Roller Bearing
  • IKO CF6UU Cam Follower and Track Roller - Stud Type
  • IKO WS85125 Thrust Roller Bearing
  • IKO WS1831 Thrust Roller Bearing
  • IKO CF16 Cam Follower and Track Roller - Stud Type

Top Products

KOYO 6208ZC3 Single Row Ball Bearings TIMKEN H715311-3 Tapered Roller Bearings DAIKIN VZ50C44RJBX-10 DAIKIN Piston Pump VZ50 Series
REXRTOH A10VSO71ED/31R-PPA12N00 Piston Pump A10VSO 83 Timken l44600la Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Guangzhou Ouster Hydraulic Co., Ltd.. Copyright © 2017 - 2023 All Rights Reserved.

  • Home
  • Stock Categories
    • REXRTOH Piston Pump A10VSO 45
    • REXRTOH Piston Pump A10VSO 71
    • DAIKIN Piston Pump VZ50 Series
    • DAIKIN Piston Pump VZ63 Series
    • DAIKIN Piston Pump V70 Series
    • DAIKIN Piston Pump VZ80 Series
    • DAIKIN Piston Pump Model
    • FAG Bearing
    • IKO Bearing
    • INA Bearing
    • KOYO Bearing
    • NSK Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Throttle check valve
    • REXROTH Twin throttle check valve
    • REXROTH Check valves
    • REXROTH Directional poppet valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • REXROTH Throttle check valves
    • REXROTH Directional spool valves
    • Jlm714149 Bearing
    • Timken 3984 Bearing
    • Jm511910 Bearing
    • Timken M86610 Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Bearing Slewing Ring
    • Kaydon Slewing Bearing
    • THK Linear Guide
    • THK Miniature Linear Guide
    • THK Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • THK Linear Bearings And Rails
    • THK Linear Motion
    • Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Single-row Deep Groove Ball Bearings
    • Wide Series Cylindrical Roller Bearings
  • Technical Articles
  • REXRTOH Piston Pump A10VSO 45
  • REXRTOH Piston Pump A10VSO 71
  • DAIKIN Piston Pump VZ50 Series
✖

Home

Stock Categories

Technical Articles

REXRTOH Piston Pump A10VSO 45

REXRTOH Piston Pump A10VSO 71

DAIKIN Piston Pump VZ50 Series

Contact Us